Plastic element serving as horizontal support and joining element for - corrugated cardboard display stands (POS). It is used to join the stand shelf either to the side or back wall of the stand. This is the vertical version of shelf support.
One part of the support element is mounted to either the side or back wall of the stand and the second part horizontally - under the shelf.
Horizontal supporting elements are used by stand designers to hold the parts of the cardboard display stands (POS displays) together - ensuring that they can be disassembled afterwards by the end-user. Two horizontal elements are used for a single shelf - one on each side of the shelf. Also this type of support can be used to join the shelf with the back wall of the display stand.
This element is a patented solution.
Most important plate dimensions are shown in the drawing, production tolerances may change these values to some extent - e.g. depending on the material properties. If you want to know the tolerances please contact us.
Dimension | Value | Dimension | Value |
---|---|---|---|
A: | 56mm | G: | 72.5mm |
B: | 12mm | H: | 49.7mm |
C: | 2.3mm | I: | 17mm |
D: | 50mm | J: | 47mm |
E: | 50mm | K: | 10mm |
F: | 18.5mm | L: | 18.4mm |
This handle is made of original Polystyrene material. Our raw material suppliers are carefully chosen and always provide us with the spec sheets of the materials.
The spec sheet contains product dimensions, packaging cut-out dimensions, and all other parameters contained in this webpage- all in a compact PDF format.
Several products that are commonly used with this handle or simliar to it.