Mini Hidden Vertical Support Element: 1005.0

Model Description

Almost invisible low profile plastic element - vertical support and joining element for - corrugated cardboard display stands (POS). Lower than 1001.0 and 1002.0 this element can join the stand shelf to the side wall of the stand. It is equipped with two holes.

It was introduced for lower heights of the fronts of shelves - it is only 25mm high but in comparsion to clip 1004.0 it can be made almost completely invisible from the front of the shelf.

One part of the support element is mounted to the side wall of the stand and the second part to the front of the shelf.

Supporting elements are used to mount the parts of the cardboard display stands (POS displays) together - so that they can be disassembled afterwards. Two vertical elements are used for a single shelf - one on each side of the shelf.

This element is a patented solution.

Model Info

Default Mounting

More Technical Info

Dimensions are shown below.

Scroll down
hidden mini plastic vertical support for display stands 1005.0 - dimensions

Product Dimensions

Most important plate dimensions are shown in the drawing, production tolerances may change these values to some extent - e.g. depending on the material properties. If you want to know the tolerances please contact us.

Dimension Value Dimension Value
A: 70mm G: 29mm
B: 2.3mm H: 25mm
C: 25mm I: 61mm
D: 37mm J: 10mm
E: 29.5mm K: 11mm
F: 13.5mm

Support material

This support element is made of original Polypropylene material. Our raw material suppliers are carefully chosen and always provide us with the spec sheets of the materials.

Product PDF spec sheet

The spec sheet contains product dimensions, packaging cut-out dimensions, and all other parameters contained in this webpage- all in a compact PDF format.

Looking for the right handle for your need - please ask us